sunbeam heated blanket replacement cord

sunbeam heated blanket replacement cord – Watch Video

Sunbeam Heated Blanket: Troubleshooting And Replacement Cord

Sunbeam heated blankets are popular during the colder months for keeping warm and cozy. However, these electrical devices may encounter issues over time. One common problem is a faulty cord that needs replacement. In this article, we will guide you through the troubleshooting process and provide step-by-step instructions on how to safely replace the cord of your Sunbeam heated blanket.

Resetting Controls And Troubleshooting Common Issues

Before jumping to the conclusion that your heated blanket’s cord needs to be replaced, it is essential to troubleshoot any potential issues with the controls. Start by unplugging the blanket from the power source and ensuring that all control settings are turned off. After a few minutes, plug the blanket back in and try turning it on again. Sometimes, a simple reset is all that’s needed to resolve common issues.

If the problem persists, it’s time to delve deeper into troubleshooting. Check for any visual damage on the control unit or cord. Look for frayed wires, burnt marks, or signs of wear and tear. If you find any visible damage, it is advisable to replace the cord rather than attempting a DIY repair. However, if everything appears to be in good condition, you can proceed with inspecting the control light.

How To Identify And Troubleshoot Control Light Problems

The control light on your Sunbeam heated blanket indicates if the power is flowing correctly and if the blanket is properly connected. If the control light does not turn on, it could be a sign of a faulty cord or a loose connection.

First, double-check that the power cord is securely plugged into the outlet. If the connection seems fine, try plugging the cord into a different outlet to rule out a power source issue.

If the control light still does not illuminate, there may be an internal problem with the cord. Gently wiggle the cord near the control unit while observing the light. If the control light flickers or turns on intermittently, it suggests a loose connection within the cord. In such cases, replacing the cord is the best course of action.

• Double-check the power cord connection
• Try a different outlet
• Wiggle the cord near the control unit to check for loose connection

“If the control light flickers or turns on intermittently, it suggests a loose connection within the cord.”

Visual Damage Inspection And DIY Repair Solutions

Visual damage to the heated blanket’s cord is a clear sign that it needs to be replaced. If you notice frayed wires, exposed copper, or burnt marks on the cord, it is unsafe to continue using it. Attempting a DIY repair is not recommended as it may compromise the safety of the blanket and could lead to electrical hazards. It is always best to replace the cord with a genuine replacement part.

However, if the damage is minimal and limited to the outer insulation of the cord, you can temporarily repair it with electrical tape. Remember to exercise caution and seek a professional replacement cord as soon as possible to ensure the long-term safety and functionality of your Sunbeam heated blanket.

• If you notice frayed wires, exposed copper, or burnt marks on the cord, replace it.
• Do not attempt a DIY repair, as it can be dangerous.
• Use electrical tape for temporary repairs with minimal damage.
• Seek a professional replacement cord to ensure long-term safety and functionality.

Ensuring A Secure Control Connection For Optimal Functionality

A secure control connection is crucial for the overall functionality of your Sunbeam heated blanket. Before replacing the cord, check that the control unit and cord are securely connected. Ensure that the plug fits snugly into the control unit and that the connection is not loose or unstable.

If the connection does not seem secure, gently wiggle the plug to see if it becomes loose. If it does, it indicates a loose connection that may be contributing to the issues you are experiencing. In such cases, replacing the cord is essential to ensure a secure and reliable control connection.

Bullet Points:

• Secure control connection is crucial
• Check the connection of control unit and cord
• Ensure snug fit of plug into control unit
• Avoid loose or unstable connections
• Gently wiggle the plug to check for looseness
• Replace the cord if necessary

Power Cord Replacement: A Step-By-Step Guide

Replacing a Sunbeam heated blanket’s power cord requires careful attention to detail and following the appropriate steps. Here is a step-by-step guide to safely replace your heated blanket’s power cord:

• Step 1: Unplug the blanket from the power source and disconnect it from the control unit.
• Step 2: Identify the connection point between the cord and the control unit.
• Step 3: Carefully detach the cord from the control unit, ensuring not to damage any surrounding components.
• Step 4: Locate the connection point between the cord and the blanket.
• Step 5: Disconnect the cord from the blanket, again being cautious not to cause any damage.
• Step 6: Take your new replacement cord and connect it to the control unit, following the manufacturer’s instructions.
• Step 7: Connect the other end of the replacement cord to the heated blanket, ensuring a secure connection.
• Step 8: Double-check all connections to make sure they are stable and secure.
• Step 9: Plug the blanket into the power source and test the controls to ensure they are functioning correctly.

Seeking Assistance: How To Contact Consumer Care For Support

If you encounter any difficulties during the troubleshooting process or have specific questions about your Sunbeam heated blanket, it is advisable to contact Consumer Care for support.

Sunbeam’s Customer Care team is dedicated to helping customers find solutions to their product-related issues.

To contact Consumer Care, visit Sunbeam’s official website and look for the “Contact Us” or “Customer Support” section. There, you will find contact information such as a phone number or email address to reach out to their support team.

Be sure to have relevant details about your heated blanket, such as the model number and the issues you are facing, ready to provide them with accurate information for prompt assistance.

• Visit Sunbeam’s official website
• Look for the “Contact Us” or “Customer Support” section
• Provide relevant details about your heated blanket (model number, issues you are facing)

“If you encounter any difficulties during the troubleshooting process or have specific questions about your Sunbeam heated blanket, it is advisable to contact Consumer Care for support.”

Finding And Purchasing The Right Replacement Parts From Ereplacement Parts

When it comes to finding and purchasing the right replacement parts for your Sunbeam heated blanket, eReplacement Parts is a reputable source to consider. They offer a wide range of replacement cords and other parts for various Sunbeam heated products.

To find the right replacement cord, visit the eReplacement Parts website and search for “Sunbeam heated blanket replacement cord.” You will be presented with several options to choose from. Make sure to select the correct model and follow the ordering instructions provided by the website. It is essential to purchase genuine replacement parts to ensure the proper functioning and safety of your heated blanket.

Goodman’S Sales Service: Reliable Options For Obtaining A Replacement Cord

Goodman’s Sales Service is a reliable option for obtaining a replacement cord for your Sunbeam heated blanket. Specializing in appliance parts and accessories, Goodman’s Sales Service offers a wide range of products for various brands, including Sunbeam.

To find a replacement cord, visit the Goodman’s Sales Service website and search for “Sunbeam heated blanket replacement cord.” Browse through the available options and select the appropriate cord for your specific heated blanket model. Follow the ordering instructions provided by the website to complete your purchase. Verify the compatibility of the replacement cord with your blanket before finalizing the transaction.

Conclusion And Next Steps For Resolving Heated Blanket Issues

To resolve issues with your Sunbeam heated blanket, it is important to address a faulty cord. Here are some steps to help you troubleshoot and fix the problem:

• Follow the troubleshooting steps: Begin by referring to the user manual or online resources provided by Sunbeam. These steps will guide you through common issues and their solutions.

• Identify control light problems: Check if the control light on your blanket is functioning properly. If it is not turning on or flickering, it may indicate a problem with the cord.

• Inspect for visual damage: Carefully examine the cord for any signs of wear and tear, frayed wires, or exposed parts. Visual damage can cause a malfunction in your blanket.

• Ensure a secure control connection: Make sure the cord is securely plugged into the control unit and the blanket. A loose connection can interfere with the blanket’s functionality.

• Replace the power cord if necessary: If you find any significant damage or suspect a faulty cord, consider replacing it. This will ensure the safe and efficient operation of your heated blanket.

If you encounter difficulties during this process, feel free to seek assistance from Consumer Care. You can also explore purchasing a replacement cord from reputable sources such as eReplacement Parts or Goodman’s Sales Service.

By taking these necessary steps and promptly addressing the issue, you can once again enjoy the warmth and comfort of your Sunbeam heated blanket.

💡

You may need to know these questions about sunbeam heated blanket replacement cord

Where is the model number on a Sunbeam heated blanket?

To locate the model number on a Sunbeam heated blanket, refer to the wash label attached to the blanket. The wash label conveniently displays the Sunbeam logo along with the corresponding model number. Simply check this label for the necessary information.

Does Sunbeam company still exist?

Yes, Sunbeam company still exists today. Following its emergence from bankruptcy in 2002, it rebranded as American Household, Inc. (AHI), and its household products division was renamed Sunbeam Products, Inc. While now operating under a different name, Sunbeam continues to thrive as a subsidiary, maintaining its presence in the industry and offering a wide range of household products. The company has successfully evolved and adapted over the years, ensuring its continued existence and relevance in the market.

Why do Sunbeam electric blankets stop working?

Sunbeam electric blankets may stop working due to a variety of reasons. Firstly, it is crucial to ensure that the control cord is correctly connected to the heated bedding module. If this connection is not secured properly, it can disrupt the flow of electricity and consequently cause the blanket to stop working.

Additionally, it is essential to check that the power cord is securely connected to the wall outlet. If the power cord becomes loose or is not completely plugged in, it can disrupt the flow of electricity, leading to the malfunction of the electric blanket. Moreover, it is crucial to double-check that the control is switched to the “On” position. In some instances, dual controls might inadvertently get switched, causing the blanket to try and operate the opposite side of the heated bedding, resulting in a loss of functionality.

Which Sunbeam electric blankets are being recalled?

Sunbeam is recalling certain models of their electric blankets, namely the Ultra Lush, Royal Luxe, and Royal Posh blankets. These blankets, which were sold from September 2022 to January 2023 for $120, were available on Amazon and in small independent stores. Specifically, the recall pertains to the Sunbeam Queen Size Heated Blanket with the model number 32810027.

Reference source
https://www.amazon.com/electric-blanket-cord-replacement/s?k=electric+blanket+cord+replacement
https://www.dhses.ny.gov/sunbeam-heated-blankets-recalled-due-burn-and-fire-hazards-distributed-star-elite#:~:text=The%20blankets%20were%20sold%20with,label%20affixed%20to%20the%20blanket.
https://en.wikipedia.org/wiki/Sunbeam_Products#:~:text=Post%2DSEC%20investigation-,In%202002%2C%20Sunbeam%20emerged%20from%20bankruptcy%20as%20American%20Household%2C%20Inc,the%20subsidiary%20Sunbeam%20Products%2C%20Inc.
https://www.sunbeam.com/on/demandware.store/Sites-sunbeam-Site/default/Support-Show?cfid=bedding-troubleshooting